10 Myths Your Boss Has Regarding Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is important to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they generally fit into frames that were previously in use very easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric and not on the floor and could be trampled.

Once the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional comes out and fix the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the distance between the door and the window is significant, you may need to consider an alarm system that includes an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time, they can suffer from a variety of issues, including sliding. A sagging uPVC windows could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from getting worse.

To fix a sagging window you can try repositioning the hinges. First, you'll need to open the windows to get at the frame. After that, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having repositioned your hinges. If you're happy with the fit, tighten the screws to ensure they stay in the right place.

If you are unable to move the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. It is crucial to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. Often, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and then perform an initial test fit. The joints at the corners of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it's important to take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is either damaged or missing.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on how severe the problem is, the old caulking might need to be removed. It is essential to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you may have to replace the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to note that if the leak originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens with a breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. The process of replacing a hinge on a window is essentially a simple process, but it's easier to do when you have a person to help you hold the frame up.

Verify that the uPVC hinges open and close in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem can be caused by opening the window incorrectly or due to a poor installation in the factory. Sending us a photo via our website will often resolve the problem. We are always happy to give advice.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It also helps prevent corrosion and decrease the chance of sticking. It is recommended to do this at least once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also be disaligned as a result of wear, which can cause gaps where the sash and frame meet. This can be easily repaired by giving them good clean, but in the event that they are beyond repair it might be necessary to get them aligned or replaced. The interlock may be disaligned. This happens on the hinge's side, and might require to be cleaned. In some cases it might be necessary to replace the hinges.

The next most common reason for draughts is window seals, these are prone to wear or damaged over time and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window repair sill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security for your home with a little regular maintenance and repairs. However, it is important to recognise that all windows have a life span and they may reach an point at which it is more economical to replace them than fix them. So, if you're having issues with your upvc windows, it is best to seek professional assistance as soon as you can.