Ghost Immobiliser Problems Tips From The Top In The Business

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your valuable item from theft. It's discreet and does not require additional key fobs in order to operate.

The device utilizes buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin code sequence that can be modified up to 20 times. This will then allow your vehicle to begin.

Simple PIN code Change Process

Many owners are upgrading their security due to the increase in vehicle theft. There are many types of aftermarket security devices available including tracking systems, immobilisers and alarms. However, not all of them are equally effective in protecting your car. While a tracking system may assist in finding your car in the event of theft, it does not prevent the crime from occurring in the first in the first place. Immobilisers, on the contrary, do exactly what they state on the tin: they disable your car's motor so that it isn't able to be started. The Autowatch Ghost is one of the most advanced options available, making it almost impossible for thieves to steal your vehicle.

The ghost device makes use of the buttons on your car to create a unique sequence which must be entered in order for the engine to start. This can be done via the indicator stalk, window or heater buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their car without having to use the button sequence. This is especially useful if you need to give your car away for valet parking or servicing because the immobiliser will still be activated and not disabled.

The Ghost is a truly unique and ingenious device that is used in conjunction with the buttons in your vehicle instead of being a separate unit. This means that it is not just a highly effective security measure against theft from your vehicle but can also be transferred over to any future cars you may own, making it more valuable than traditional steering wheel locks.

Weatherproof small device

The Autowatch Ghost Immobiliser is a sophisticated security system that protects your pride & joy from key hacking and cloning. It also prevents ECU swapping. It's a weatherproof, tiny device that connects directly to your vehicle's ECU via the CAN data bus to disable the engine. It can be installed in the vehicle without wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices which are a typical technique that car thieves use to circumvent immobilisers.

The benefit of CAN data over conventional systems is that they operate in a silent manner. It cannot be detected using sophisticated RF scanning and code-grabbing technologies and cannot be recognized by conventional diagnostic tools. The Autowatch ghost does not produce LED indicators and instead uses the buttons in your vehicle, such as the steering wheel, centre console or door panels to create a unique, customizable disarm sequence. You can create a sequence that is up to 20 presses long for added security. The iPhone app only allows one connection, using the Ghost's unique pairing code. the Ghost. All communication between the two devices is secured.

The Ghost prevents car thieves adding an ignition key replacement or replacing the ECU to bypass the immobiliser. The engine can only be started only if a valid PIN is entered. It can also be put into Valet/Service mode for temporary operation (with set parameters such as 30mph speed limit) so that you can transfer your vehicle to a valet service or to be serviced without needing to enter a PIN.

Each vehicle is tested

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser for CANbus. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device detects electronic signals that block your car's system from performing its normal startup routine until you input an individual passcode. The system can be turned on or off by using your smartphone app, without the need for extra wires.

The factory-installed immobilisers function by using a transponder that is integrated into the key. It transmits a message to the ECU. If the correct code is transmitted, the car will start however if the transponder is swapped with one from another vehicle the immobiliser will not recognise it. This enables the vehicle to be stolen and started. A South African company that is at the forefront of safety systems technology created the Ghost immobiliser. It protects you from hacking or key cloning, and even key theft. Only by physically towing your car away can thieves steal it, and they would still not be able drive it.

Ghost uses the buttons in your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to create an unique PIN sequence that can be changed that must be entered prior to you are able to use your car. This is done without extra hardware, such as key fobs. It can take up to 20 presses. It is also unrecognizable to diagnostic equipment and does not transmit radio frequency signals so thieves cannot use sophisticated RF scanning or code grabbing techniques to determine if a security system has been installed.

Unlike physical anti-theft devices like clamps or wheel locks Ghost how much is a ghost immobiliser hidden within the vehicle, so it cannot be taken away or disabled by thieves. It is even more difficult to get rid of than a car alarm that requires disarming via the use of a button sequence. This makes it a great addition to an GPS tracking device which can be used to locate your vehicle after it's been taken.

Override of emergency PIN code

You don't have to go far on social media sites to find stories or even videos of vehicles that were stolen by car thieves using the most advanced technology tools available to them. This includes key-cloning devices as well as hacking tools that allow them to start the vehicle without the original keys.

The Ghost immobiliser has been specifically designed to prevent this, and give you an extra layer of security in order to prevent your vehicle from being targeted by thieves. It generates a unique pin code by pushing the buttons on your steering wheel, door panel and on the centre console. This unique PIN is entered alongside the original key fob to prevent the engine from getting started. The unique override PIN can be found on the black card you will receive following your installation. It's easy to remember because there aren't any LEDs.

The device is hidden inside the vehicle's wiring and doesn't emit any radio signals, so it isn't able to be recognized by thieves using diagnostic software that can recognise what type of security system you have installed. This makes it a fantastic alternative to the tracker.

In contrast to other security systems that have a relay inside the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependent). This allows them to disable the vehicle completely by sending a digital block to the ECU and engine.

They can also be linked to an analog alarm, immobiliser or tracker. This must be specified prior to the installation. They also work with valet and service modes, and are is a great alternative to a tracking device when you bring your vehicle to the dealer for repairs to an electrical problem.

Service/Valet mode

In recent years there has been a increase in the number of vehicles stolen without the owner's keys. It is easier than ever before to take your joy and pride due to the availability of key cloning tools and door lock picks. We've developed the Autowatch ghost immobiliser tracker Immobiliser to combat this. It blocks your car from being driven, even if you keys have been cloned.

It connects directly to your car's ECU (Engine Control Unit) via the CAN data loop. It's completely silent because it does not utilize radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also stops you from introducing an ECU or key to bypass the system as only the PIN code allows the engine to start.

The device is hidden inside your vehicle and is accessed by existing buttons on your steering wheel, center console, and door panels. A unique and reversible PIN code sequence of up to 20 digits must be entered prior to being able to start your car.

This is the first aftermarket immobiliser for CAN bus to be designed to stop your car being started or driven away in the event that a PIN code hasn't been entered first. If you are driving away with the device arming the indicator will flash on your dashboard that will flash continuously for around 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to run just as normal. If you do not enter your PIN at this point, the warning will continue to flash and require another PIN code for every attempt to start your car.